Petalon Sheet

By sticking it on the heater part of the iron, it will improve the sliding properties and prevent the fabric from shining.
One set contains 6 pieces.

・Prevents slipping and shining when ironing shoes, clothes, etc.
- When sewing non-slip materials, you can attach it to the table or head of your sewing machine to make it more slippery.

+200°C

232mm x 150mm, 6 pieces

●It has good sliding properties, making ironing more efficient.
●The fabric does not become shiny.
●Glue and resin are less likely to adhere to or burn onto the iron.
●If you use a steam iron, you can finish the garment without using a pressing cloth.
●No need to worry about rust on the bottom of the iron.

① Cut the sheet to the size of the area you want to glue.
2) Peel off the film and stick it to the surface you want to adhere it to.
3) If you are using a steam iron, make sure to open a steam hole after applying the sticker.

Point 1: It can be easily cut with scissors or a utility knife.
Point 2 To apply it nicely, press it down using the flat side of a spoon to remove any air bubbles.
Point 3 If there is any glue left when replacing the sheet, it can be removed relatively easily by soaking a towel in a small amount of nail polish remover (acetone) and wiping it lightly. After removing it, wipe it thoroughly with a dry towel.

*When disposing of the product, please dispose of it as non-burnable waste in accordance with the method specified by your local government.