Highly processing Films
PTFE coated film "FPI series"
- Highly processing Films
- Polyimide Type
overview
This product is made of polyimide fluoroplastic coated with fluororesin.
In addition to the properties of fluoroplastic, it has excellent dimensional stability and surface smoothness.
Applications
Release sheet
·Insulating sheet
Maximum service temperature
・FPI-S06: +260°C
・FPI-100: +200°C
* Maximum service temperature varies depending on the type of fluoroplastic used.
structure
Features
●Excellent heat resistance, chemical resistance, lowest friction, and Insulation.
●It has superior dimensional stability and surface smoothness compared to films made of fluoroplastic alone.
Characteristics table
| Product code | Thickness (μm) |
Maximum width (mm) |
Tensile strength (MPa) |
Elongation (%) |
Coated Surface |
|---|---|---|---|---|---|
| FPI-S06 | 15 | 500 | 740 | 70 | Single-sided |
| FPI-100 | 30 | 480 | 230 | 55 | Double-sided |
| 55 | 480 | 262 | 55 | ||
| 80 | 450 | 270 | 70 |
*The characteristic values in the table above are measured values and not specification values.
*The difference in Tensile strength is due to the type of polyimide film used.
*For sizes other than those listed above, please contact us separately.
*This product is made to order, so please contact us separately regarding order quantities.
