Adhesive Tapes
ASF-125A（MX）
- Adhesive Tapes
- Fluororesin/Film based material
- RoHS Directive
Overview
Adhesive tape with a high-strength, low-elongation fluoroplastic (PTFE) film as the basic material and applied a silicone adhesive on one side.
It has lower elongation and improved tensile strength and heat resistance than ASF-115 (MX).
Main applications
・ Roll protection of polyethylene laminator
・ Roll masking for the purpose of preventing adhesion and use as a belt
・ Applications that require low elongation
Operating temperature limit
-60℃ to +250℃
Structure
Characteristics
• Light gray in color.
• Excellent tensile strength compared to ASF-115 (MX) and ASF-118A FR.
• It has high heat resistance and can be used up to 250°C.
• The surface of the tape has excellent anti-adhesion qualities as well as release property, surface smoothness and water-repellent property.
• Excellent electric insulation and chemical resistivity.
• Meets the 20th notification of the Food hygiene law by the Ministry of Health, Labor and Welfare.
Typical dimensions
| Total thickness (mm) | Width (mm) | Maximum width (mm) | Length (m) |
|---|---|---|---|
| Standard | |||
| 0.1 | 38, 50 | 250 | 33 |
*Please consult us separately for the dimensions other than above.
Typical properties
| Product code | Total thickness (mm) | Tensile strength (N/25mm) | Elongation (%) | Adhesion 180° peel test (N/25mm) | Breakdown voltage (kV) | Maximum operating temperature (℃) |
|---|---|---|---|---|---|---|
| ASF-125A(MX) | 0.1 | 250 | 60 | 6 | 12 | 250 |
*Values shown in this table represent measurements and do not constitute guaranteed values.
